Reset Search
 

 

Article

HOW TO add Fabric Manager to Extreme Management Center using ZTP+ Discovery

« Go Back

Information

 
TitleHOW TO add Fabric Manager to Extreme Management Center using ZTP+ Discovery
Objective
Add Fabric Manager to Extreme Management Center using ZTP+ Discovery
Environment
  • Extreme Management Center (XMC, formerly NetSight)
  • Fabric Manager
  • Software Release 8.2 and above
Procedure
  • XMC > Administration > Profiles tab
  • XMC > Network > Discovered tab
This is the outline of the procedure for adding Fabric Manager to Extreme Management Center (XMC)
  1. Add CLI Credentials
  2. Create Administration Profile
  3. Add administration Profile to the Fabric Manager Engine
  4. ZTP+ Discovery

Detailed instructions are further available @ https://emc.extremenetworks.com/content/oneview/docs/network/fabric/t_add_fm.htm.
 
Additional notes
Fabric Manager uses TCP port 8443 for communication with Extreme Management Center (XMC, formerly NetSight). This port can not be changed at this time. If XMC's default listening port has been changed from 8443 to an alternative, it must be reverted back to 8443 for use with Fabric Manager.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255