Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

HOW TO Configured RADIUS Outbound Policy for Cisco and Extreme ISW Switch Shell Access

« Go Back

Information

 
TitleHOW TO Configured RADIUS Outbound Policy for Cisco and Extreme ISW Switch Shell Access
Objective
Configure the correct RADIUS outbound value attribute pair for shell login to Cisco or Extreme ISW switches.
Environment
  • Identity Engines
  • All Software Releases
  • Cisco
  • ISW
Procedure
Create an Outbound Attribute and Outbound Value pair using the following steps:
  1. Log into Ignition Dashboard.
  2. Click Configuration.
  3. Navigate Site 0 -> Site Configuration -> Provisioning -> RADIUS -> Outbound Attributes.
  4. Click New.
  5. Type a "Outbound Attribute" name; example "ISW-shell".
  6. Click VSA radio button.
  7. Select Cisco and Cisco-AVPair for "Vendor" and "VSA" respectively.
  8. Click OK.
  9. Navigate Site 0 -> Site Configuration -> Provisioning -> RADIUS -> Outbound Values.
  10. Click New.
  11. Type a "Outbound Value Name"; example "ISW-shell-priv15".
  12. Click New.
  13. Via the "Choose Global Outbound Attribute" pulldown, select the Outbound Attribute name created in step 5; example "ISW-shell".
  14. Click String radio button and type "shell:priv-lvl=15" in this field.
  15. Click OK.
Use the newly created Outbound Value created in step 11; example "ISW-shell-priv15" in RADIUS policies as an outbound value.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255