Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

How to Create an Interface and Trunking on VOSS?

« Go Back

Information

 
TitleHow to Create an Interface and Trunking on VOSS?
Objective
How to Create an Interface and Trunking on VOSS?
Environment
  • VSP Series
  • All Supported Software Versions
Procedure
Create VLAN, add ports, remove ports from default VLAN and create VLAN interface
  1. Type enable
  2. Type config term
  3. Type vlan create <VLAN_ID> type port-mstprstp <MSTP_INSTANCE>
  4. Type vlan members remove 1 <PORT_LIST>
  5. Type vlan members add <VLAN_ID> <PORT_LIST>
  6. Type interface vlan <VLAN_ID>
  7. Type ip address <IP_ADDRESS> <MASK> <MAC_OFFSET>
Create trunking
  1. Type enable
  2. Type config term
  3. Type interface gigabitEthernet <PORT>
  4. Type encapsulation dot1q
  5. Type vlan members add <DEFAULT_VLAN_ID> <PORT>
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255