Reset Search
 

 

Article

BOSS - How to upgrade ERS via USB port

« Go Back

Information

 
TitleBOSS - How to upgrade ERS via USB port
Objective
How to upgrade the software and firmware on BOSS via USB?
Environment
  • BOSS
  • All supported software versions
Procedure
To update the Firmware:

Download diagnostics from Extreme Portal. The appropriate diag file name is found in the Release Notes for each software release.

1) Type: enable
2) Type: download usb diag <FILENAME>
3) Optional: no-reset  Do not reset the switch after downloading.

    Firmware will upgrade and switch or stack will reboot.

 Example:

 download usb diag 3600_6003_diags.bin

To upgrade the Software:

1) Type: enable
2) Type: download usb image <FILENAME>
3) Optional: no-reset  Do not reset the switch after downloading.

    Software will upgrade and switch or stack will reboot, upgrade, and reboot again.

 Example:

 download usb image ers3600_6.2.1.015.img
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255