Reset Search
 

 

Article

How to Configure Access Policy to Allow Communication Through SNMPv3 Protocol on VOSS Switches

« Go Back

Information

 
TitleHow to Configure Access Policy to Allow Communication Through SNMPv3 Protocol on VOSS Switches
Objective
The objective is to configure an access-policy on a VOSS switch to allow communication through the SNMPv3 protocol.
Environment
  • VOSS Build 8.1.6.0
  • VSP 7400
Procedure
Following is an example of an "access-policy" configuration: 
access-policy 22 name "agal" precedence 2 network 10.2.22.100 24 accesslevel rwa
access-policy 22 access-strict
access-policy 22 ssh snmpv3 tftp ftp
access-policy 22 snmp-group TEST usm

 
Additional notes
You may also be interested in the following articles: 
How To Configure SNMPv3 on VOSS?
VSP SNMP polling blocked by default Access Policy 

Additional information about how to configure access-policy is available starting on page 378 of the Administering VOSS guide.
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255