Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

Initial Config of Application Telemetry on X440-G2, X450-G2, X460-G2 and X670-G2, x690 Devices

« Go Back

Information

 
TitleInitial Config of Application Telemetry on X440-G2, X450-G2, X460-G2 and X670-G2, x690 Devices
Objective
How to Configure Application Telemetry on an X440-G2, x460-G2, x670-G2, x690
Environment
  • X440-G2 running EXOS 22.5.1 or higher
  • EXOS 22.5.1
  • X460-G2, X450-G2 or X670-G2 running 22.5.1 software or above
  • X690
  • Extreme Analytics running 8.1.2.59 or above
Procedure
  1. Model X440-G2 (or other) in Extreme Management Center with administrative SNMP and CLI credentials
  2. Select Analytics > Configuration Tab > Configuration Menu > Engines Drop-down
  3. Right-click on the Analytics Engine in use
  4. Select Configuration from the Drop-down menu
  5. Set the Flow Collection Type: Drop-down to a value of Both
  6. In the resulting Application Telemetry Sources UI, select Add
  7. Highlight the X4XX-G2 and select OK
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255