Reset Search
 

 

Article

How toRoute WoL on 200-Series

« Go Back

Information

 
TitleHow toRoute WoL on 200-Series
Objective
The config allows directed broadcast from a WoL server to be routed to VLAN 52.
Environment
200-Series
Procedure
1. Enter enable mode
Enable

2. Enter config mode
Config

3. Enter config mode for the interface facing the client
interface vlan 52

4. Enable directed broadcast on the interface
ip netdirbcast
exit

Directed broadcast are a security concern, use this ACL outgoing on the interfaces facing the client.
access-list 103 permit udp host <IP_WoL_SERVER> any eq echo
access-list 103 permit udp host <IP_WoL_SERVER> any eq 9
access-list 103 deny udp any any eq echo
access-list 103 deny udp any any eq 9

access-list 103 permit ip any any
ip access-group 103 vlan 53 out 1
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255