Reset Search
 

 

Article

How to Configure Spanning Tree Priority on the 200-Series

« Go Back

Information

 
TitleHow to Configure Spanning Tree Priority on the 200-Series
Objective
How to configure the spanning tree priority on 200-Series
Environment
200-Series
Procedure
Type the following commands to set the spanning tree priority
1.  Enable
2.  Config
3.  (Config)#spanning-tree mst priority 0 <PRIORITY>
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255