Reset Search
 

 

Article

How To Configure SNMPv3 on the 800-Series

« Go Back

Information

 
TitleHow To Configure SNMPv3 on the 800-Series
Objective
How to configure SNMPv3 on the 800-series
Environment
  • 800-Series
  • All Firmware
Procedure
CLI:
delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all
config snmp engineID <ENGINEID>
create snmp view All 1 view_type included
create snmp group v3group v3 auth_priv read_view All write_view All notify_view All
create snmp user v3adminuser v3group encrypted by_key auth md5 <KEY> priv des <KEY>
or
create snmp user v3adminuser v3group encrypted by_password auth md5 <PASSWORD> priv des <PASSWORD>
WebGui:
How To Configure SNMPv3 Access on an 800-Series Switch
https://www.youtube.com/watch?v=V0FbOu0hcFo
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255