Reset Search
 

 

Article

AP-5131 COMMAND LINE SYNTAX FOR FIRMWARE UPGRADE

« Go Back

Information

 
TitleAP-5131 COMMAND LINE SYNTAX FOR FIRMWARE UPGRADE
Objective
To provide CLI (command line interface) syntax to upgrade the legacy AP5131 firmware. 
Environment
  • AP5131
  • AP-5131
Procedure
Access AP5131 via CLI (Command Line Interface) using SSH, Telnet, and/or console access. Once logged into the AP5131 CLI, perform the following. This example is using TFTP protocol to transfer file:

admin(system)>fw-update
admin(system.fw-update)>set file <filename>
admin(system.fw-update)>set server <ip-address>
admin(system.fw-update)>save
admin(system.fw-update)>update tftp  

AP will reboot into the new firmware.

FTP can also be used, but you must set the user and password:

admin>system
admin(system)>fw-update
admin(system.fw-update)>set file <filename>
admin(system.fw-update)>set server <ip-address>
admin(system.fw-update)>set user <ftp-user-name>
admin(system.fw-update)>set passwd <ftp-user-password/1 to 39 characters>
admin(system.fw-update)>save
admin(system.fw-update)>update ftp  

AP will reboot into the new firmware. 

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255