Reset Search
 

 

Article

AP8432 GE2 Power Out CLI Command

« Go Back

Information

 
TitleAP8432 GE2 Power Out CLI Command
Objective
How to configure the AP8432 to allow 802.3af power via interface ge2. This will allow the AP8432 ge2 to power up an 802.3af capable device.
Environment
  • WirelessWiNG Controllers
  • WirelessWiNG Access Points
  • WiNG v5.x Software
  • WirelessWiNG
  • WiNG v5
  • AP84xx
  • AP7612
Procedure
Access the AP CLI (Command Line Interface) and use the following syntax:

enable [enter]
self [enter]
service power-config 3af-out [enter]
com write [emnter]

This feature can also be applied at the profile level of a Virtual Controller AP or adopted AP via wireless controller. 
Additional notes
 APs require 3at power to:
  • Enable secondary ethernet port
  • Enable USB port
  • Enable 3rd Radio
  • Enable built-in PoE Out
WiNG AP not negotiating 802.3at power when connected to Cisco WS-C3750X-48P

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255