Reset Search
 

 

Article

How to configure management interface on S/K/7100-Series

« Go Back

Information

 
TitleHow to configure management interface on S/K/7100-Series
Objective
How to configure or change a management interface on an S/K/7100-Series
Environment
  • S-Series
  • K-Series
  • 7100-Series
  • All firmware versions
  • Management IP Address
  • Interface
Procedure
The command is issued from switch mode

​To create the management interface   
    set ip address <ip-address> mask <ip-mask> gateway <ip-gateway> interface <interface-name>

SSA-100-BB(su-config)->set ip address 192.168.224.100 mask 255.255.255.0 gateway 192.168.224.1 interface default

​To change the management interface
     set ip interface <interface-name> default

SSA-100-BB(su-config)->set ip interface vlan.0.5 default​


To see the the interface created issue
SSA-100-BB(su-config)->show running-config
configure terminal
!
 interface vlan.0.1
  ip address 192.168.224.100 255.255.255.0 primary management
  no shutdown
  exit
 ip route 0.0.0.0 0.0.0.0 192.168.224.1
Additional notes
Changing the management interface will not affect switched traffic.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255