Reset Search
 

 

Article

Configure NAT in WiNG Devices

« Go Back

Information

 
TitleConfigure NAT in WiNG Devices
Objective
To configure NAT for internal vlan
Environment
All WiNG devices
Procedure

Given a scenario where you have vlan 1 as vlan that able to reach internet (NAT out) and vlan 20 that created by WiNG device itself :
  1. Create ip access-list to allow NAT to happen
    configure terminal
    ip access-list NAT
    permit ip any any rule-precedence 1

     
  2. Configure NAT outside for your vlan 1
    self
    interface vlan 1
    ip nat outside
  3. Configure NAT inside for your vlan 20
    self
    interface vlan 20
    ip nat inside
  4. Create NAT function by using ip access-list created on steps 1
    self
    ip nat inside source list NAT precedence 1 interface vlan 1 overload
Additional notes
Please note that scenario above is DHCP configured in vlan 20 (NAT inside) so that client able to obtain IP automatically once connected to vlan 20 network.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255