Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

Configuring a Identifi Wireless Controller to use IPFIX to connect to a Analytics appliance without MirrorN

« Go Back

Information

 
TitleConfiguring a Identifi Wireless Controller to use IPFIX to connect to a Analytics appliance without MirrorN
Objective
To configure a wireless appliance and Analytics to use IPFIX without using MirrorN.
In 10.21.xx controller software and higher, and 7.09.xx analytics software and higher, this can be configured.
Environment
  • Identifi
  • Purview
  • Netflow
  • IPFIX
  • ipfix
  • Analytics
Procedure
Configuring the wireless Controller

Click on VNS->Global->Netflow/MirrorN
Add in the IP address of the Analytics Appliance and then DO NOT add the port.

User-added image

Configuring from the Analytics Appliance from Extreme Management Center
  • Click on Analytics Tab->Click on Configuration Tab
  • Click on Appliance->Configuration->Wireless Controller Flow Sources
  • Click +Add button
  • Add Wireless Controller IP and WLANS to view.
  • Port is OK to be blank

User-added image
Additional notes
For configuration with MirrorN functionality, which requires an ESA interface hardwired to Analytics Appliance, see the folllowing
How to configure Identifi Wireless Controller to send data to Purview

2600 and 3600 AP's are not supported with any 10.x firmware.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255