Reset Search
 

 

Article

How To Create VLAN in EXOS

« Go Back

Information

 
TitleHow To Create VLAN in EXOS
Objective
Creating VLAN in EXOS
Environment
EXOS
Procedure
  • create [ {vlan} vlan_name ] {tag tag } {description vlan description} {vr name }
Example:
* X450e-48p.2 # create vlan test tag 100
* X450e-48p.3 # configure vlan test add port 1 tagged
* X450e-48p.4 # configure vlan test add port 2
* X450e-48p.5 # sh vlan
---------------------------------------------------------------------------------------------
Name            VID  Protocol Addr       Flags                       Proto  Ports  Virtual   
                                                                            Active router
                                                                            /Total
---------------------------------------------------------------------------------------------
Default         1    ------------------------------------------------ ANY    0 /0   VR-Default 
Mgmt            4095 ------------------------------------------------ ANY    1 /1   VR-Mgmt    
test            100  ------------------------------------------------ ANY    0 /2   VR-Default 
---------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
        (d) Dynamically created VLAN, (D) VLAN Admin Disabled,

Total number of VLAN(s) : 3 
sh te* X450e-48p.6 # sh test
VLAN Interface with name test created by user
    Admin State:         Enabled     Tagging:   802.1Q Tag 100 
    Description:         None
    Virtual router:      VR-Default
    IPv4 Forwarding:     Disabled
    IPv4 MC Forwarding:  Disabled
    IPv6 Forwarding:     Disabled
    IPv6 MC Forwarding:  Disabled
    IPv6:                None
    STPD:                None
    Protocol:            Match all unfiltered protocols
    Loopback:            Disabled
    NetLogin:            Disabled
    OpenFlow:            Disabled
    QosProfile:          None configured
    Egress Rate Limit Designated Port: None configured
    Flood Rate Limit QosProfile:       None configured
    Ports:   2.           (Number of active ports=0)
       Untag:       2
       Tag:         1
        Flags:    (*) Active, (!) Disabled, (g) Load Sharing port
                  (b) Port blocked on the vlan, (m) Mac-Based port
                  (a) Egress traffic allowed for NetLogin
                  (u) Egress traffic unallowed for NetLogin
                  (t) Translate VLAN tag for Private-VLAN
                  (s) Private-VLAN System Port, (L) Loopback port
                  (e) Private-VLAN End Point Port
                  (x) VMAN Tag Translated port
                  (G) Multi-switch LAG Group port
                  (H) Dynamically added by MVRP
                  (U) Dynamically added uplink port
                  (V) Dynamically added by VM Tracking
Additional notes
vlan_name: Specifies a VLAN name (up to 32 characters).
Tag: 802.1q tag value
vlan-description: Specifies a VLAN description (up to 64 characters) .
VR name: Specifies a VR or virtual routing and forwarding (VRF) instance in which to create the VLAN.

For more information see:  http://documentation.extremenetworks.com/exos_commands_22.1/exos_21_1/exos_commands_all/r_create-vlan.shtml

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255