Reset Search
 

 

Article

Extreme Control Center - How to use Discover to identify Network devices

« Go Back

Information

 
TitleExtreme Control Center - How to use Discover to identify Network devices
Objective
To learn how to use discover feature to add network elements into Extreme Control Center. This replaces the discovery tool in Netsight Console.
 
Environment

Extreme Control Center

Netsight
Discover
Discovery

Procedure

From the Extreme Control Center
1. Click on Network Tab
2. Click on Devices
3.Click on World:Icon
4. Click on Site
User-added image

4. Under Address Range, Click Add
5. In text boxes, add the starting and ending ip addresses to discover, to the right, add or subtract any pProfiles you wish to use.
6. Click Update
User-added image

7.By default, all of the devices are added in, in addition to all other options. So use accordingly.
User-added image
8. Click Save at bottom of screen
User-added image

9. Click Discover at the bottom of the screen
User-added image

10. Click on Operations to watch the progress
User-added image

Once it is complete, new devices will appear under the device tab, and/or in any maps.
 
Additional notes
For further information please also see our video;  Extreme Control Center - How to use Discover to identify network devices

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255