Reset Search
 

 

Article

How To Configure MVR

« Go Back

Information

 
TitleHow To Configure MVR
Objective
To Configure Multicast VLAN Registration (MVR).
Environment
  • Summit
  • X440, X460, X670
  • EXOS all
Procedure
  1. create vlan  <MULTICAST_SENDER_VLAN>
  2. create vlan  <MULTICAST_RECEIVER_VLAN>
  3. configure vlan <MULTICAST_SENDER_VLAN> ipaddress <IP>/<MASK>
  4. configure vlan <MULTICAST_RECEIVER_VLAN> ipaddress <IP>/<MASK>
  5. enable mvr
  6. configure mvr add vlan <MULTICAST_SENDER_VLAN>
By default MVR works in static mode for dynamic mode configure policies:
  1. configure vlan <MULTICAST_SENDER_VLAN> mvr-address <MVR_ADDRESS_RANGE>
  2. configure vlan <MULTICAST_SENDER_VLAN> static group <MVR_STATIC_GROUP_RANGE> 
Example policy files:

 entry mvr_adress_range {
if match all{
nlri <IP>/<MASK> ;
} then {
permit;
}
}

 entry mvr_static_group_range {
if match all{
nlri <IP>/<MASK> ;
} then {
deny;
}
}
 
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255