Reset Search
 

 

Article

How To Configure NTP on SecureStack

« Go Back

Information

 
TitleHow To Configure NTP on SecureStack
Objective
How To Configure NTP on SecureStack
Environment
  • A4-Series
  • B5-Series
  • C5-Series
  • All firmware versions
Procedure
Issue the following commands via CLI:
set sntp server <IP_ADDRESS>
set sntp client < broadcast | disable | unicast >
set sntp poll-interval <INTERVAL>
Additional notes
  • The poll <INTERVAL> is entered in value range from 6 to 10
  • Poll interval is 2^(value) in seconds
  • Example: poll-interval of 8 is 2^8, which equals 256 seconds.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255