Reset Search
 

 

Article

How To Configure Static ARP Entry on S-series?

« Go Back

Information

 
TitleHow To Configure Static ARP Entry on S-series?
Objective
Configure a static ARP entry that will not be overwritten.
Environment
  • S-Series
  • K-Series
  • Firmware All Versions
  • ARP
  • Static ARP
Procedure
On the S- and K-Series, use the arp command in configuration command mode to configure a permanent static ARP entry
Example config)->arp 1.2.3.4 aa:bb:cc:aa:bb:cc:
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255