Reset Search
 

 

Article

How To Configure WLAN Service For NAC External Captive Portal Redirect

« Go Back

Information

 
TitleHow To Configure WLAN Service For NAC External Captive Portal Redirect
Objective
How To Configure WLAN Service For NAC External Captive Portal Redirect
Environment
  • Identifi
  • All firmware
Procedure
VNS -> WLAN Services -> Select WLAN -> Auth & Acct

Authentication
  • Mode: change from None to External (then hit Save)
  • Mode: External -> Configure
  • EWC Connection: Change from Admin port IP (192.168.10.1) to esa0 IP
  • EWC Connection: Change port from 0 to value between 32768 - 65535
  • Encryption: Default
  • Shared secret: Default
  • Redirection URL: Change to http://NAC_IP_ADDRESS
Check "Enable MAC-based authentication"

RADIUS Servers
Add Radius Server
Check "MAC" and "Acct", do not check "Auth"
Radius TLVs: Check VSAs: Topology Name, Role Name, VNS Name, AP Name, SSID

Save changes
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255