Reset Search
 

 

Article

How To Configure a Layer 3 Interface on a C5 Securestack

« Go Back

Information

 
TitleHow To Configure a Layer 3 Interface on a C5 Securestack
Objective
How to configure a Layer 3 interface on a C5 Securestack
Environment
  • C5-Series
  • All firmware versions
Procedure
    1.  Create the VLAN:
set vlan create <VLAN_ID>

    2.  Enter router configuration mode:
router
enable
configure

    3.  Create the layer 3 interface:
interface vlan <VLAN_ID>

    4.  Assign an IP address and subnet mask:
ip address <IP_ADDRESS> <SUBNET_MASK>

    5.  Bring the interface administratively up:
no shutdown

 
Additional notes
No additional command is required to configure Variable Length Subnet Masks such  as a /30.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255