Reset Search
 

 

Article

How To Configure a Trap to be Sent when a New MAC address is Learned

« Go Back

Information

 
TitleHow To Configure a Trap to be Sent when a New MAC address is Learned
Objective
How to configure a trap when a new address is learned on a port.
Environment
Securestack
S-Series
N-Series
K-Series
All Firmware
Procedure
To configure the feature newaddrtrap, please run the following commands:
set newaddrtrap enable
set newaddrtrap ge.1.1 enable
To see the commands in the configuration:
 
Show config newaddrtrap

#newaddrtrap
set newaddrtrap enable
set newaddrtrap ge.1.1 enable

 
Additional notes
The newaddressTrap will report the interface but both the MAC Address and IP of the new station is not displayed.
The MIB requirements do not call for the MAC or IP.
This is Functioning as Designed
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255