Reset Search
 

 

Article

How To Display Active PEP Users In NAC VPN Solution

« Go Back

Information

 
TitleHow To Display Active PEP Users In NAC VPN Solution
Objective
Display Policy End Point (PEP) active users on SSA or N series Switch
Environment
  • All NAC Platforms
  • VPN
  • SSA Series Switch
  • N Series Switch
Procedure
SSH or telnet into the SSA or N series switch and type:  show policy rule ipsourcesocket
Additional notes
When running the "show policy rule ipsourcesocket" command the output will look something like this:

N1 Chassis(su)->show policy rule ipsourcesocket
Admn|Rule Type   |Rule Data            |Msk|PortStr  |RS|ST|STDO|dPID|aPID|Mir|U
admn|IPSource    |10.10.10.5           | 32|All      | A| V|    |    |   2|   |?



The IP address value under Rule Data is the IP of the VPN-connected / NAC authenticated End System.
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255