Reset Search
 

 

Article

How To Dynamically Assign VLAN ID to Port Based on IP of Connected Device

« Go Back

Information

 
TitleHow To Dynamically Assign VLAN ID to Port Based on IP of Connected Device
Objective
The following configurations assign a port to a VLAN based on the IP address of the connected clients.It can be done with or without dynamic egress, the SAT will be more stable if you do not use the dynamic egress option.
Environment
S-Series
Procedure
  • Assigning port to VLAN without using dynamic egress
set policy rule admin-profile ipsourcesocket 10.10.123.0 mask 24 admin-pid 1
set policy profile 1 name v0123 pvid-status enable pvid 123 untagged-vlans 123
  • Using dynamic egress
set policy profile 1 name v0123 pvid-status enable pvid 123 [ set policy rule admin-profile ipsourcesocket 10.10.123.0 mask 24 admin-pid 1
[set vlan dynamicegress 123 enable]
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255