Reset Search
 

 

Article

How To Redirect Client Traffic to NAC using Web Redirect / External Captive Portal

« Go Back

Information

 
TitleHow To Redirect Client Traffic to NAC using Web Redirect / External Captive Portal
Objective
This shows how to configure a wireless controller to redirect a client to a NAC for network access
Environment
  • IdentiFi Wireless
  • Firmware Version 09.xx
  • NAC
Procedure
Login to your wireless controller via Web GUI
  1. Click VNS tab > Roles drop down tab > select the non-authenticated Role from the list
  2. On VLAN & Class of Service tab select the Access Control dropdown list and choose Containment VLAN
  3. Click the VLAN dropdown and select your B@HWC VLAN
  4. Click the Policy Rules tab and setup the rule list using the add as follows:
​​Rule#1: Dest IN None OUT IP address of Wireless Topology (IP_ADDRESS/32) Allow
Rule#2: Dest IN None OUT IP address hosting portal (IP_ADDRESS/32) Allow
Rule#3: Dest IN None OUT (udp port 53) Allow
Rule#4: Dest IN None OUT DHCP server (UDP Port 67) Allow
Rule#5: Deny all (0.0.0.0/0)

      5.  Click Save

Note: The bridge at controller topology must have a layer-3 IP address configured (cannot use physical topology for this purpose)
Note:  MAC-Based Authentication under the WLAN Service (Auth & Acct) tab MUST be enabled
  
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255