Reset Search
 

 

Article

How To Translate 800-Series Configuration to EXOS CLI

« Go Back

Information

 
TitleHow To Translate 800-Series Configuration to EXOS CLI
Objective
This article shows the CLI output from the 800-Series and the links to the articles for equivalent EXOS commands.
Environment
  • 800-Series
    • EXOS
Procedure
Arp İnspection
800-Series
config arp_inspection ports all trust_state untrust

EXOS
How to prevent ARP Poisoning

DHCP Snooping   
800-Series
enable dhcp_snoop
config dhcp_snoop ports all state enable
config dhcp_snoop ports 10 trust_state trust (uplink)
    
EXOS
How to configure DHCP Snooping on EXOS

Denial of Service
800-Series
config dos_prevention dos_type all action drop state enable

EXOS
Enable dos

IGMP
800-Series
config igmp_snooping all default state enable

EXOS
Which command is used to enable igmp snooping?

LLDP
800-Series
enable lldp

EXOS
800-Series
It is enabled by default
Is LLDP enabled by default from 15.6 version

Spanning tree
800-Series
enable stp
config stp version rstp
config stp maxage 25
config stp ports 1-23 edge true (User port)
config stp ports 24 edge false (Uplink Port)
config stp priority 32768 "Edge switches"
config stp priority 4096 "Root switch"


EXOS
How to configure RSTP in EXOS

MAC LOCKING
800-Series
config port_security ports 1-23 admin_state enable max_learning_addr 2 lock_address_mode

EXOS
How to limit the number of MAC addresses learned on a port

Broadcast suppression
800-Series
config traffic control 1-23 broadcast enable action drop threshold 30 countdown 5 time_interval
10  “User ports”
config traffic control 24-28 broadcast enable action drop threshold 300 countdown 5 time_interval
10


EXOS
How to Rate Limit Multicast or Broadcast Flooded traffic on EXOS

SNMP
800-Series
enable snmp
show account
delete account <username>
config account admin
XXXXXX

XXXX

EXOS
Use this article to delete the account
How to remove default SNMP credentials in EXOS
Use  this article to configure  SNMPv3
How to set up SNMPv3 on EXOS

Default route
800-Series
create iproute default 192.168.210.1 1 primary

EXOS
​How To Configure a default route in EXOS

SNTP
800-Series
enable sntp
config time_zone operator + hour 2 min 0
config sntp primary 192.168.100.30 poll-interval 480


EXOS
How to configure Simple Network Time Protocol (SNTP) to synchronize the switch time with an external NTP Server

IP Address
800-Series
config ipif System ipaddress 192.168.210.31/24

EXOS
How to configure an IP address on the management interface of an EXOS switch

Configure VLAN
800-Series
# VLAN
show vlan ports

config vlan default delete 2,4-8
config vlan default add tagged 1
create vlan VLAN10 tag 10
config vlan VLAN10 add tagged 1-10 advertisement disable


EXOS

How To Create VLAN in EXOS
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255