Reset Search
 

 

Article

How do I clear ports to the default speed and duplex

« Go Back

Information

 
TitleHow do I clear ports to the default speed and duplex
Objective
How do I clear ports to the default speed and duplex
Environment
  • SecureStack
  • C5-Series
  • B5-Series
  • N-Series
  • S-Series
  • K-Series
  • 7100-Series
  • All Firmware Versions
Procedure
To clear commands to default see example below:
set port negotiation ge.1.4 enable
set port duplex ge.1.4 half
set port speed ge.1.4 10
In order to show that the ports are actually removed:
su)->show config port
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
!
#***** NON-DEFAULT CONFIGURATION *****
!
!
# Firmware Revision: 06.81.04.0001
!
!

#port
set port lacp port ge.1.45 aadminkey 4546
set port lacp port ge.1.46 aadminkey 4546
set port vlan ge.1.1 198
set port vlan ge.1.2 198
Additional notes
In order to see how ports are manually set to port speed / duplex see the following link:
How To Hard Set a Port's Speed/Duplex (Disable Negotiation)

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255