Reset Search
 

 

Article

How do I configure MFP (Management Frame Protection) on my wireless controller

« Go Back

Information

 
TitleHow do I configure MFP (Management Frame Protection) on my wireless controller
Objective
How do I configure MFP (Management Frame Protection) on my wireless controller?
Environment
  • Extreme Wireless
  • identiFi Wireless
  • Firmware 9.x
  • Firmware 10.x
  • MFP (Management Frame Protection)
  • PMF (Protected Management Frames)
  • 802.11w
Procedure
From the wireless controller GUI:
  1. Select the VNS Menu
  2. Select the WLAN Services menu
  3. Select the WLAN Service to be configured
  4. Select the Privacy tab
  5. From the drop down select  "Disabled, Enabled or Required"
  6. Click Save button
Note: The default setting for MFP is Enabled
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255