Reset Search
 

 

Article

How to set a management IP address on a 200-Series switch?

« Go Back

Information

 
TitleHow to set a management IP address on a 200-Series switch?
Objective
How to set a management IP address on a 200-Series switch?
Environment
  • 200-Series
  • All firmware versions
Procedure
Via CLI:
(Extreme 220) >enable

(Extreme 220) #network protocol none

Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n) y

(Extreme 220) #network parms <IP_ADDRESS> <NETWORK_MASK> <DEFAULT_GATEWAY>

(Extreme 220) #network mgmt_vlan <VLAN_ID>

Via Web UI:

System > Connectivity > IPv4

User-added image
Additional notes
  • By default, the management network interface is looking for a DHCP address.
  • Default management VLAN is 1

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255