Reset Search
 

 

Article

How to Configure WLAN for RADIUS Client AD Authentication

« Go Back

Information

 
TitleHow to Configure WLAN for RADIUS Client AD Authentication
Objective
How to Configure WLAN for RADIUS Client AD Authentication
Environment
  • IdentiFi
  • All Hardware Versions
  • All Firmware Versions
  • RADIUS/AD Server
Procedure
B@AP VNS with Clients being authenticated through AD
1.  Access Controller's VNS page through GUI
2.  Click "NEW" in Left Hand Column
3.  Click "START VNS WIZARD"
4.  VNS Wizard Creation
  • Give new VNS Name
  • Select "Data" for Category
  • Click "Next"
5.  Basic Settings
  • Enabled: (Checked)
  • Synchronize: (Checked if HA)
  • SSID: (SSID Name)
  • Authentication Mode: Disabled
  • Mode: Bridge Traffic Locally at AP
  • VLAN ID: (wired traffic VLAN)
  • Select Radio Button for ( ) Untagged or (@) Tagged
  • Enable Authentication: (Checked)
  • Click "Next"
6. Authentication
  • Select RADIUS Server you wish to use
  • Click "Next"
7. Privacy
  • Click "None" Radio Button (For Now)
  • Click "Next"
8. Radio Assignment
  • Click "Next" (No Radios for now)
9.  Summary
  • Click "Finish"
  • Click "Close"
10.  WLAN Services in Left Hand Column
  • Click on VNS Name
Click on PRIVACY Tab
  • Click on WPA
  • WPA v.1 Disabled (Unchecked)
  • WPA v.2 Enabled (Checked)
  • Encryption: AES ONLY
  • Group Key Power Disabled (Unchecked)
  • Management Frame Protection DISABLED
  • Fast Transition Disabled (Unchecked)
  • Click "Save"
  • Acknowledge RADIUS Pop Up requirements
Click on AUTH & ACCT Tab
  • Mode:"802.1x"
  • Select Radius server - Click "Use"
  • Select Radius Auth - Click "enable"
  • Click "Save"
Click on WLAN SERVICES Tab
  • Click on Radios you wish to use
  • Click on ENABLE in Center Window
  • Click "Save"
Additional notes
Same can be configured for B@EWC with a few extra steps in "5.  Basic Settings" By selecting Interface and applying an IP to each.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255