Reset Search
 

 

Article

How to Direct Traffic Using Policy Based Routing N/S/K/7100-Series

« Go Back

Information

 
TitleHow to Direct Traffic Using Policy Based Routing N/S/K/7100-Series
Objective
Using PBR, redirect specific traffic to a router other than the one in the routing table
Environment
  • S-Series
  • K-series
  • N-series
  • 7100 Series
  • All Firmware Versions
Procedure
  1. Telnet/SSH/Cli to the unit under test
  2. Type "router"
  3. Type "config"
  4. Type "ip access-list extended TEST
  5. Type "permit ip host <source_ip> host <destination_ip>"
  6. Type "exit"
  7. Type "route-map policy TESTRedirect permit 10"
  8. Type "match ip address TEST"
  9. Type "set next-hop 10.10.10.1"
  10. Type "exit"
  11. Type "interface vlan.0.<source_vlan>
  12. Type "ip policy route-map TESTRedirect"
  13. Type "exit"
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255