This SecureStack policy configuration will, for all ports, prioritize incoming frames - VLAN-tagged or not - which have DSCP value 46 or 48. Note1: In the applied network, those values are used by the routers to identify Voice over IP traffic. This will not be true of all networks. Note2: SecureStack B3 and B2 units will require a Policy License before this configuration may be applied to them.
Solution set policy profile 1 name VoIP set policy port ..* 1 set policy rule 1 iptos 176 mask 6 cos 6 set policy rule 1 iptos 184 mask 6 cos 6 By default the outgoing prioritized (priority 6) frames will hit transmit queue#5, while non-prioritized (priority 0) traffic will hit transmit queue#1. Queue#1 by default receives no service if anything is waiting in queue#5 ('show port txq'). If outgoing frames are VLAN-tagged, the tag of affected frames will carry a Priority of 6. The specific rules you use will depend upon which bits of the TOS byte you wish to examine: If you want DSCP values 44 and 46 and don’t care about the remaining two TOS bits: set policy rule 1 iptos 176 mask 6 cos 6 [= TOS bits 101100xx] set policy rule 1 iptos 184 mask 6 cos 6 [= TOS bits 101110xx] If you want DSCP values 44 and 46 and want to ensure that the remaining two TOS bits are zero: set policy rule 1 iptos 176 mask 8 cos 6 [= TOS bits 10110000] set policy rule 1 iptos 184 mask 8 cos 6 [= TOS bits 10111000] If you want TOS values 44 and 46: set policy rule 1 iptos 46 mask 8 cos 6 [= TOS bits 00101100] set policy rule 1 iptos 48 mask 8 cos 6 [= TOS bits 00101110] Please contact Extreme Networks Technical Services for further assistance, as necessary.