Reset Search
 

 

Article

How to add Default Gateway to Motorola/Zebra WiNG 5.x Devices:

« Go Back

Information

 
TitleHow to add Default Gateway to Motorola/Zebra WiNG 5.x Devices:
Objective
How to add Default Gateway to Motorola/Zebra WiNG 5.x Devices.
Environment
  • All Summit WM3000 Series Controllers
  • All Altitude Access Points
  • All WiNG 5.X Versions
Procedure
Via Graphical User Interface (GUI)


1. Login in to WiNG 5.x device
2. Double click on Configuration
3. Double click on Device
4. Double click on [correct device shown in window]
5. Click on Network
6. Click on Static Routes
7. Click on Add Row
8. In Network section type "0.0.0.0/0"
9. In Gateway section type "[IP address of Default Gateway]"
10. Click on Ok
11. Click on Commit
12. Click on Save


Via Command Line Interface (CLI)

1. Login in to RFS CLI
2. Type "enable" and press [enter]
3. Type "config" and press [enter]
4. Type "self" and press [enter]
5. Type "ip default-gateway (ip address of gateway) and press [enter]
6. Type "commit write" and press [enter]
7. Type "exit" and press [enter] repeatedly until logged out.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255