Reset Search
 

 

Article

How to add many radius return attributes to a policy mapping in Extreme Access Control (NAC)

« Go Back

Information

 
TitleHow to add many radius return attributes to a policy mapping in Extreme Access Control (NAC)
Objective
By default, the previous limit was 5 custom attributes were able to be added to a policy mapping.
Environment
NAC
Access Control
Control
Extreme Management Center
Cisco
Per User ACL
Procedure
First, we must add in the following to the switch configuration

Control->Access Control->Select Engine Group->Switches
Select Switch and Edit
Under Select Radius attributes to send-Select New
Name List
Add the following. The first three are defaults. The last one %ORG1_RADIUS_ATTRS_LIST% allows us to create the list.

Tunnel-Private-Group-Id=%VLAN_ID%:%VLAN_TUNNEL_TAG%
Tunnel-Type=13:%VLAN_TUNNEL_TAG%
Tunnel-Medium-Type=6:%VLAN_TUNNEL_TAG%

%ORG1_RADIUS_ATTRS_LIST%

Click Save
At Configure Device Window Click Save (We will later come back here to set Policy Domain)
Example below
User-added image
Now we set the Profile
Control->Access Control->Profiles-Select Policy Mappings->Select Default
Select the Policy Mapping you wish to edit and Click Edit
Scroll Down until you see Organization 1:
Copy and Paste in attributes you wish to send
Click Save

Example below
User-added image




 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255