Reset Search
 

 

Article

How to allow only specific MAC Address to communicate on wireless SSID

« Go Back

Information

 
TitleHow to allow only specific MAC Address to communicate on wireless SSID
Objective
How to allow only specific MAC addresses to communicate on SSID
Environment
  • IdentiFi Wireless
  • All Firmware Versions
Procedure
  1. From the Web GUI Interface
  2. Select the VNS menu
  3. Select the Roles menu
  4. Select the Role to be modified
  5. Select Policy Rules tab
  6. Filter rule definition menu
  7. Click the Add button
  8. Go to the direction field
  9. Change in filter and out filter to both
  10. Go to the l2 classification field
  11. From the MAC Address drop down select user defined MAC address (Type the MAC address )
  12. Go to the Action field
  13. From the access control drop down menu select Allow
  14. Click the Okay button
  15. Create deny rule
  16. Click the Add button
  17. Go to the l2 classification field
  18. From the MAC Address drop down select Any MAC
  19. Go to the action field
  20. From the Access Control drop down menu select Deny
  21. Save 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255