Reset Search
 

 

Article

How to change IP Address on IdentiFi Wireless Controller physical management interface through CLI

« Go Back

Information

 
TitleHow to change IP Address on IdentiFi Wireless Controller physical management interface through CLI
Objective
How to change the IP address on the IdentiFi Wireless Controller Physical Interface via CLI 
Environment
  • Extreme Wireless
  • IdentiFi Wireless 
  • V2110
  • C35
  • C4110
  • C5210
  • Firmware All Versions
  • Topology
Procedure
  1. Login to the admin port of the Controller 
  2. Type topology enter
  3. Type "physical 1" enter
  4. Type l3 enter
  5. Type show enter  (verify current IP address) 
  6. Type ip x.x.x.x/24 enter
  7. Type apply enter
  8. type show enter  (verify new IP address) 
Additional notes
For step 3 quotes must be used when there is a space in the interface name 
How to setup IdentiFi Wireless Controller physical management interface through CLI
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255