Reset Search
 

 

Article

How to change the Native VLAN on a WiNG Express AP

« Go Back

Information

 
TitleHow to change the Native VLAN on a WiNG Express AP
Objective
How to change the Native VLAN on a WiNG Express AP
Environment
  • All WiNG Express APs
  • WiNG Express 5.8
  • Swift UI
Procedure
  1. Login to the controller via browser
  2. From the Menu tree, go to Access Points
  3. Under Managed Access Points click on the AP name
  4. Under IP settings click on Add
User-added image
  1. Create your VLANS and assign a static IP address to the VLAN that is to become the new Native VLAN
  2. Click Apply after you create a VLAN and Add to create a new one
User-added image
  1. One all VLANs have been created, click on Apply in the bottom right hand corner of the page
  2. From the Menu tree go to LAN
  3. From Lan Port Settings, edit the ge1 port
  4. In the allowed VLAN field enter all VLANs you previously created
  5. Change the Untagged VLAN to the New Native VLAN you'd like to use
  6. Click on Update
User-added image
  1. Click on Apply in the bottom right corner of the page
Additional notes
Please contact our technical support team if further assistance is required

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255