Reset Search
 

 

Article

How to check and confirm if TELNET, SSH and WEB access is enabled or not from the Switch's CLI

« Go Back

Information

 
TitleHow to check and confirm if TELNET, SSH and WEB access is enabled or not from the Switch's CLI
Objective
How to check and confirm if TELNET, SSH and WEB access is enabled or not from the Switch's CLI? 
Environment
  • All Exos switches
  • All Exos versions
Procedure
Use the command "show managment" to confirm if the TELNET, SSH and WEB access is enabled or not from the Switch's CLI.
X460G2-48t-G4.1 # show management
CLI idle timeout                 : Enabled (20 minutes)
CLI max number of login attempts : 3
CLI max number of sessions       : 8
CLI paging                       : Enabled (this session only)
CLI space-completion             : Disabled (this session only)
CLI configuration logging        : Disabled
CLI password prompting only      : Disabled
CLI RADIUS cmd authorize tokens  : 2
CLI scripting                    : Disabled (this session only)
CLI scripting error mode         : Ignore-Error (this session only)
CLI persistent mode              : Persistent (this session only)
CLI prompting                    : Enabled (this session only)
CLI screen size                  : 24 Lines 80 Columns (this session only)
CLI refresh                      : Enabled
Telnet access                    : Enabled (tcp port 23 vr all)
                                 : Access Profile : not set
SSH access                       : Enabled (Key valid, tcp port 22 vr all)
                                 : Secure-Mode    : Off
                                 : Access Profile : not set
SSH2 idle time                   : 60 minutes
Web access                       : Enabled (tcp port 80)
                                 : Access Profile : not set
Total Read Only Communities      : 0
Total Read Write Communities     : 0
RMON                             : Disabled
SNMP access                      : Disabled
                                 : Access Profile : not set
SNMP Compatibility Options       :
    GETBULK Reply Too Big Action : Too Big Error
    IP Fragmentation             : Disallow
SNMP Notifications               : Enabled
SNMP Notification Receivers  : None
SNMP stats:     InPkts 0       OutPkts   0       Errors 0       AuthErrors 0
                Gets   0       GetNexts  0       Sets   0       Drops      0
SNMP traps:     Sent   0       AuthTraps Enabled
SNMP inform:    Sent   0       Retries   0       Failed 0
X460G2-48t-G4.2 #

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255