Reset Search
 

 

Article

How to check updated result perodically on WiNG based wireless controller.

« Go Back

Information

 
TitleHow to check updated result perodically on WiNG based wireless controller.
Objective
Checking refreshed result periodically on WiNG based controller.
Environment
WiNG
Procedure
use the command "watch x [ command wanted to issue ] "
then result refreshed every x seconds.

for example, below command it display the result just once.

vx9000-C0D753#show interface counters on vx9000-C0D753
--------------------------------------------------------------------------------------------------------------
    INTF            MAC         RX-PKTS     RX-BYTES        RX-DROP     TX-PKTS     TX-BYTES       TX-DROP    
--------------------------------------------------------------------------------------------------------------
 vlan1      00-0C-29-C0-D7-53   868          43542             0           39       20952           0              
 vlan8      00-0C-29-C0-D7-53   1107626      244401468         0           677344   205953814       0              
 ge1        00-0C-29-C0-D7-53   27713686     10849959373       0           473952   189764208       0              
--------------------------------------------------------------------------------------------------------------


but with the command " watch 5 show interface counters on vx9000-C0D753", it display updated result every 5 seconds.
this command is useful usually when user need to check the port's statistics.


 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255