Reset Search
 

 

Article

How to configure BFD for BGP in EOS

« Go Back

Information

 
TitleHow to configure BFD for BGP in EOS
Objective
Configure BFD for BGP on EOS switches
Environment
  • S-Series
  • BGP
  • BFD
Procedure
1.  Create the probe and put it in service
probe <NAME> bfd
inservice
exit

2.  Configure the interfaces you want to use BFD under the BGPconfig.
router bgp <AS_Number>
neighbor bfd <IP_Address>
exit
!

3.  Configure the probe on the vlan interface
interface vlan.0.<VLAN_NUMBER>
bfd probe-name <PROBE_NANE>
exit
Additional notes
Check the state of the neighbor
(su-config)->show bfd neighbor
BFD Neighbor Information

Neighbor State Uptime Interface
--------------------------------- ---------- ------------- -----------
10.21.10.3 Up 40s vlan.0.10

Displayed 1 neighbor

How to Configure BFD for OSPF Neighbor 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255