Reset Search
 

 

Article

How to configure DHCP static Binding

« Go Back

Information

 
TitleHow to configure DHCP static Binding
Objective
  • Configure DHCP static Binding 
  • Check DHCP status
Environment
  • All Summit WM3000 Series Controllers
  • ExtremeWiNG Controllers
  • WirelessWiNG Controllers
  • ExtremeWiNG Access Points
  • WirelessWiNG Acess Points
  • WiNG v5.X Software
Procedure
  1. Create DHCP server policy
  2. Configure DHCP Poo;
  3. Specify static-binding using MAC address and configure the IP address for static binding
rfs4000-882A99>enable
rfs4000-882A99#configure terminal
rfs4000-882A99(config)#dhcp-server-policy DHCPRFS4K
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K)#dhcp-pool VLAN20
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20)#network 192.168.20.0/24
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20)#address range 192.168.20.101 192.168.20.200 
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20)#default-router 192.168.20.100
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20)#dns-server  8.8.8.8
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20)#static-binding hardware-address 2C-5B-B8-7B-03-9F
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20-binding-2C-5B-B8-7B-03-9F)#ip-address 192.168.20.105
rfs4000-882A99(config-dhcp-policy-DHCPRFS4K-pool-VLAN20-binding-2C-5B-B8-7B-03-9F)#commit write
Please Wait .
[OK]

Check the static binding using the below command:
rfs4000-882A99#show ip dhcp binding manual 
--------------------------------------------------------------------------------
  #                 IP ADDRESS                    MAC/CLIENT-ID           
--------------------------------------------------------------------------------
  1               192.168.20.110               48-5A-3F-18-2D-FD



 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255