Reset Search
 

 

Article

How to configure SIEM for RADIUS

« Go Back

Information

 
TitleHow to configure SIEM for RADIUS
Objective
Configure RADIUS on SIEM
Environment
  • SIEM Console
  • Admin tab
  • Authentication icon
Procedure
  1. Click the Admin tab in the Dashboard.
  2. Click the Authentication icon under User Management.
  3. Choose RADIUS Authentication from the Authentication Module drop down box.
  4. Enter the following RADIUS Authentication parameters
  • RADIUS Server - Specify the hostname or IP address of the RADIUS server.
  • RADIUS Port - Specify the port of the RADIUS server.
  • Authentication Type - Choose CHAP, MSCHAP, ARAP,  or PAP.
  • Shared Secret - Specify the shared secret that DSCC uses to encrypt the RADIUS password for transmission to the RADIUS server.
       5. Click Save.

 
Additional notes
refer to the SIEM Administration Guide "Authentication Management" section beginning on page 23.

https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=12d83746-c38d-406d-9ea4-c61e8a8a9129

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255