Reset Search
 

 

Article

How to configure SNMPv2 on the 200-Series switch

« Go Back

Information

 
TitleHow to configure SNMPv2 on the 200-Series switch
Objective
How to configure SNMPv2 on the 200-Series switch
Environment
  • 200-Series
  • All firmware versions
  • SNMPv2
Procedure
Global config mode
==================
snmp-server community community-string [{ro | rw |su }] [ipaddress ip-address] [view view-name]
snmp-server group <group-name> {v1 | v2c | v3 {noauth | auth |priv}} [context context-name] [read read-view] [write writeview] [notify notify-view]
 
  • Example
 
(Extreme 210) (Config)#
(Extreme 210) (Config)#snmp-server group "200-series" v2 read "Default" write "Default"
(Extreme 210) (Config)#snmp-server community-group "fred" "200-series"
(Extreme 210) (Config)#exit
(Extreme 210) #write memory confirm
 
  • Extreme Management Center

User-added image







 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255