Reset Search
 

 

Article

How to configure a Wing 5 or Wing 7 Access Point as stand-alone via CLI

« Go Back

Information

 
TitleHow to configure a Wing 5 or Wing 7 Access Point as stand-alone via CLI
Objective
How to configure a Wing 5 Access Point as stand-alone via CLI
Environment
  • WiNG v5.x Software
  • WirelessWiNG
  • WiNG v5
  • WiNG v7
  • WirelessWiNG Access Points
  • AP82xx
  • AP84xx
  • AP85xx
  • AP71xx
  • AP75xx
  • AP76xx
  • AP5xx
Procedure
Access the AP console via SSH or console and after successful login, please perform the following:

enable [enter]
self [enter]
no mint mlcp ip [enter]
no mint mlcp vlan [enter]
commit write [enter]

The above will ensure that the AP is in stand-alone mode and will not be able to communicate with other Wing devices on same network. 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255