Reset Search
 

 

Article

How to configure a management IP address on the 800 Series switch

« Go Back

Information

 
TitleHow to configure a management IP address on the 800 Series switch
Objective
How to configure a management IP address on the 800 Series switch 
Environment
  • 800-Series
  • Firmware All Versions
  • Management Vlan
  • Management IP Address
Procedure
1. The steps below are done via the GUI interface of the 800 Series 
2. Select the Management Menu
3.Select IP interface Menu
4.Select System IP address settings
5. The default IP address is assigned to an interface name called System 
6.To assign a new management address Select the
Static button at the top of screen 
7. To change the Management Vlan Name Type the new name in that field 
8. Type the new IP address
9. Type the Subnet Mask
10.Type the Gateway address
11. Click
Apply 

What is the factory default management IP address of the 800-Series?
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255