Reset Search
 

 

Article

How to create OSPF neighbor using LAG and VMAN?

« Go Back

Information

 
TitleHow to create OSPF neighbor using LAG and VMAN?
Objective
Create OSPF neighbor using LAG through VMAN
Environment
  • EXOS All
Procedure
Topology:

SW-A ----- port 23 ---- OSPF ---- port 11 ------- SW-B

Configuration:

SW-A:

create vman "link"
configure vman link tag 1234

configure vman link add ports 23 tagged
configure vlan link ipaddress 192.168.1.1 255.255.255.252
enable ipforwarding vlan link
configure ospf add vlan link area 0.0.0.0 link-type point-to-point 
enable ospf

SW-B:

create vman "link"
configure vman link tag 1234

configure vman link add ports 11 tagged
configure vlan link ipaddress 192.168.1.2 255.255.255.252
enable ipforwarding vlan link
configure ospf add vlan link area 0.0.0.0 link-type point-to-point 
enable ospf

OSPF Neighbor output:

Neighbor ID     Pri State              Up/Dead Time                               Address         Interface
========================================================================
192.168.1.2              1 FULL      /DROTHER 00:00:03:36/00:00:00:06  192.168.1.2      link  
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255