Reset Search
 

 

Article

How To Create a Basic VRRP Configuration in EXOS

« Go Back

Information

 
TitleHow To Create a Basic VRRP Configuration in EXOS
Objective
How to create a basic VRRP configuration in EXOS
Environment
  • EXOS
  • SummitStack
  • BlackDiamond
Procedure

The configuration commands for peer A are as follows:

  • create vlan vlan10 tag 10
  • configure vlan vlan10 ipaddress 192.0.2.1/24
  • enable ipforwarding vlan vlan10
  • create vrrp vlan vlan10 vrid 1
  • configure vrrp vlan vlan10 vrid 1 priority 200
  • configure vrrp vlan vlan10 vrid 1 add 192.0.2.254
  • enable vrrp

 

The configuration commands for peer B are as follows:

  • create vlan vlan10 tag 10
  • configure vlan vlan10 ipaddress 192.0.2.2/24
  • enable ipforwarding vlan vlan10
  • create vrrp vlan vlan10 vrid 1
  • configure vrrp vlan vlan10 vrid 1 add 192.0.2.254
  • enable vrrp
Additional notes
In this example router A is configured to be VRRP Master and will own the .254 address.  Router B will only become master if router B fails.

Other VRRP features:

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255