Reset Search
 

 

Article

How to create a static lag on Modular and SecureStack switches

« Go Back

Information

 
TitleHow to create a static lag on Modular and SecureStack switches
Objective
Create a Static LAG
 
Environment
 
  • A-Series
  • B-Series
  • C-Series
  • N-Series
  • S-Series
  • 7100-Series
  • Securestack (optional)
  • LACP
  • Static LAG
  • Firmware All Versions 
Procedure
Issue the following command:
set lacp static {lag#} key {key#} {port or port range}
Example: 
->set lacp static lag.0.1 key 10 ge.1.5-8

Issuing :
        set lacp static lag.0.1
        set lacp aadminkey lag.0.1 10
        set port lacp port ge.1.5 aadminkey 10
        set port lacp port ge.1.5 disable
        set port lacp port ge.1.6 aadminkey 10
        set port lacp port ge.1.6 disable
        set port lacp port ge.1.7 aadminkey 10
        set port lacp port ge.1.7 disable
        set port lacp port ge.1.8 aadminkey 10
        set port lacp port ge.1.8 disable
->
Additional notes
  • Ensure the VLAN configuration for the lag.0.X port is identical to the underlying ports
  • For example,
  • set port vlan ge.1.1;ge.1.20;lag.0.1 10 modify-egress
    set vlan egress 20,30,40 ge.1.1;ge.1.20;lag.0.1 tagged
  • This example will configure ports ge.1.1, ge.1.20, and lag.0.1 to have vlan 10 untagged, and vlans 20,30 and 40 as tagged.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255