Reset Search
 

 

Article

How to create a VLAN on N/S/K/7100-Series and Securestack

« Go Back

Information

 
TitleHow to create a VLAN on N/S/K/7100-Series and Securestack
Objective
How to create a VLAN on N/S/K-Series and Securestack
Environment
  • S-Series
  • N-Series
  • K-Series
  • 7100-Series
  • Securestack
  • VLAN
  • 802.1q
  • All firmware versions
Procedure
1. Enter this command from the CLI 

set vlan create <vlan-id>

set vlan create 100

2. Enter this command to confirm the vlan is created

show vlan <vlan-id>

show vlan 100


The vlan will only become active when it's configured to egress an operationally up port
Additional notes
Optionally, to name the vlan:
  • set vlan name <vlan-id> name
  • set vlan name 10 vlan-blue
for more information see: How to configure a port on the N/S/K Series and Securestacks for tagged VLAN traffic and  How to configure a port for untagged traffic on N/S/K/7100-Series and Securestack

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255