Reset Search
 

 

Article

How to enable MSCHAPv2 for RADIUS management login

« Go Back

Information

 
TitleHow to enable MSCHAPv2 for RADIUS management login
Objective
How to enable MSCHAPv2 for RADIUS management login
Environment
  • K-Series
  • S-Series
  • All firmware
Procedure
  1. Configure the switch for Radius
  2. Configure the switch to send the MS-CHAPv2 RADIUS password attribute to the server:
System(rw)->set radius mgmt attribute password mschapv2

 
Additional notes
The MS-CHAPv2 password attribute must be set for IPsec to work. MS-CHAPv2 is the Microsoft Version 2 of the Challenge-Handshake Authentication Protocol (CHAP). MS-CHAPv2 provides mutual authentication between peers by piggybacking a peer challenge on the Response packet and an authenticator response on the Success packet.
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255